Case 650L

Length :Blade Straight With Drawbar: 163.3 in. (4,149 mm), Blade Straight With Ripper: 195.8 in. (4,973 mm)Height: 104 in. (2,639 mm)Width: Blade Straight: 112 in. (2,845 mm), Blade Angled: 103.7 in. (2,634 mm)Weight: Operating: 16,800 lbs. (7,619 kg) equipped with ROPS, full fuel tank, 170 lb. (77 kg) operator, track guides, backup alarm, horn and lights, 112 in. blade and 20 in. shoeGround Clearance: 14.4 in. (366 mm) at drawbarTank Capacity: Engine Oil With Filter: 13 qt. (12.3 l), Engine Oil Without Filter: 12.2 qt. (11.5 l), Engine Cooling System: 22.6 qt. (21.4 l)Fuel Tank Capacity: 41 gal. (155 l)Hydraulic Tank Capacity: Reservoir: 16.5 gal (72.7 l)Transmission Type: Dual path infinitely variable, single-lever controlled hydrostatic drive with electronic straight tracking and counter-rotationTransmission Speed: 0 - 5.5 mph (Measured using standard track chain. Increase travel speeds by 4% and reduce drawbar pull by 4% with the optional CELT track chain.)Number of Speeds: 10Tracks: Track Gauge: 68 in. (1.73 m), Shoe Width: 20 in. (508 mm)Engine Make: CaseEngine Model: Case Family IV 445TA/EHA diesel, tier 3 certifiedCylinders: 4Gross Horsepower: 80.5 hp (60 kW) @ 2,000 rpm (per SAE J1349)Net Horsepower: 74 hp (55 kW) @ 2,000 rpm (per SAE J1349)Torque: Net: 289 ft. lbs. (355 Nm) @ 1,400 rpm, Gross: 295 ft. lbs. (363 Nm) @ 1,400 rpmCooling: LiquidBore x Stroke: 4.1 x 5.2 in. (104 x 132 mm)Displacement: 274 LFuel Type: #2 dieselRated Speed: High Idle - No Load: 2,160 rpm±50, Rated - Full Load: 2,000 rpm, Low Idle: 850-950 rpmSpeed – Forward: 0-5.5 mph (0-9 km/h)Speed – Reverse: 0-5.5 mph (0-9 km/h)Voltage: 12V low-maintenance 700 cold-cranking amps @ 0° F (-18 C)Amps: 65A alternatorStd Pump Flow: 20.3 gpm (78.8 l/min) @ 2,000 rpm @ 3,000 psi (209 kPA)Blade Type: Reversible and replaceable cutting edgeBlade Width: 112 in. (2,845 mm)Blade Height: 33.1 in. (841 mm)Blade Capacity: 2 yd³ (1.53 m³)Blade Tilt: Each End (Up To 9°): 17.8 in. (452 mm)Dig Depth: Below Ground: 20.9 in. (531 mm)Ripper Depth: Maximum Penetration: 8.7 in. (221 mm)Ripper Weight: 3 Shank: 1,349 lbs. (612 kg)