- Make
- Mincon
- Model
- HDD40
- Category
- Construction / Drilling Equipment
- Location
-
North America: United States of America
2575 Northbrooke Plaza Drive Suite 100, 34119, Naples, - USA - Condition
- Used
- Price
- Price on Request
HDD Broker, Inc.
is selling this:
Mincon HDD40
Description
- General Description: Mincon HDD40.
- Seller Notes:
- -System only used twice, about 6 hours
- -Excellent Condition
- Accessories: Comes with Two 2-1/2 inch Hoses:
- -One is 30' long
- -One is 20' long
- Tool for drilling 4-1/4" (108mm) pilot bores in hard rock formations. Seller Notes: This system provides the necessary equipment to convert any HDD drill machine from a mud drilling machine to a pneumatic drilling machine.
- Recent Work/Modifications: Seller states the pump cart has New hoses, New tires and fresh fluids.
- Additional Information: SPECS
- Hammer Outside diameter: 3.35" (85 mm)
- Pilot Bit Size: 4.25" (108 mm)
- Hammer Length: 73.5" (1867 mm)
- Hammer Weight: 109 lbs (49.4 kgs)
- Piston Weight: 8 lbs (3.6 kgs)
- Bit Shank Type: HDD40
- Backhead Thread: 2-3/8" A.P.I. Reg Pin
- -Dual steering point design incorporating slanted drill bit and 2° bent sub
- -High frequency hammer cycle transmits less vibration
- -High pressure/high volume compressed air powers drilling operations and requires minimal torque
- -Shorter body design allows for easier steering in the bore hole and less rotational stresses on hammer body
- -Existing locating electronics (DCI, Sub SITE, or WIRELINE) can be used
- -Support Station delivers compressed air mixed with a water/polymer (3-5 gal/min) and rock drill oil (2-4 pints/hr) to operate the drilling cycle
- -Minimal environmentally friendly clean up, can be used on environmentally sensitive locations using biodegradable rock drill oils
- -- For more information, visit our website and enter reference #20941
- Hours : 6
$21,737 USD
$150 USD
$37,000 USD
*
Ø
▼