Teknamotor is selling this:

Teknamotor SKORPION 500 RB

Back

Make: Teknamotor
Model: SKORPION 500 RB
Category: Agriculture / Forestry Machinery / Wood Splitter & Wood Chipper
Year: 2015
Location: Europe (Continental): Poland
ul Swietokrzyska 2a, 27-400, Ostrowiec Swietokrzyski, - Poland
Condition: new
Price: Price on Request

Contact Seller

Description

Skorpion 500 RB is a drum-type chipper, meant for cooperation with a min. 120 HP farm tractor. The drive is transmitted from PTO shaft of a tractor with the speed of 540-750 revolutions per minute. Due to the large size of the material to be chipped (with a diameter up to 300 mm) this chipper is dedicated to the mechanical loading of wood wastes with the use of a hydraulic crane (as a standard the chipper is equipped with base for its attachment). Large loading area and 550 x 370 mm inlet allows chipping broad branches and other bulky forms of wood wastes.
In the standard version of chipper, the feeding system consists of built on a rocker large diameter toothed roll and a feeding table equipped with toothed 680 mm in length chain feeder, proceeded by manually folded flap. As an option the chipper can be equipped with a hydraulically folding loading table, in which two toothed chain feeders of the total length of 1280 mm are installed. Standard version of the chipper is equipped with a hydraulic pump powering the wood feeding system. Roll and chain feeders both are driven by hydraulic gear-motors.
A sector-type drum with four cutting knives (one rotation of the drum for one full cut) allows to achieve a very high potential of the chipper with a relatively low power of the tractor. Knives can be sharpened several times – even 55 mm of the nominal size - assuring theirs long-term use.
Installed screen ensures high regularity if chips. Chips are advanced from under the screen to the fan by two screw conveyors, than discharged thorough the ejection tube. Standard version of the chipper is equipped with manually swiveled by 360°ejection tube (optionally the chipper might be equipped with hydraulically foldable ejection tube with automatic swivel control by 240°, both controlled by joystick.
The construction of the chipper is set on a single axial chassis allowing the towing of the machine on all types of roads. As a standard, the machine is equipped with a rigid suspension without brake, allowing to move it with a speed up to 25 km/h. Chipper can also be equipped with a sprung axle and 40 km/h towing speed or an air-type suspension and 80 km/h speed – both axles are equipped with air brakes.
Loading table positioned at 90° to the direction of travel allows simultaneous transport of the chipper and trailer with a tractor (chipper is equipped with approved towing device).
The chipper is equipped with modern LED road lighting.
As a standard, the chipper is also additionally equipped with one of the most advanced electronic system of work control available on European market automatically protecting the propulsion system of the machine against overload/excessive duty through temporary stopping the feeding unit.
Easily editable software of the No-stress system provides a simple way to change the settings of the machine adapting it to individual needs. Preset "thick wood" and "thin wood" modes allow fast and easy change of the operation of the chipper in order to match the current material to be shred and increase the effectiveness of work. Total- and daily- hour meter is built into this system.
Produced chips may be used as a solid fuel for heating, as a raw material for production of paper, furniture boards, and after additional disintegrating in a hammer mill for pellets and briquettes production.
Purchase of a chipper Skorpion 500 RB is the perfect solution for companies and businesses which develop their business in a modern and environmentally friendly direction.
Overall dimensions (LxWxH) 3010 (3870 with towing bar) x 2360 (3000)* x 3025 (4460)* [mm]
Weight 3400** without hydraulic crane [mm]
Branch diameter logs up to 300 [mm]
No of knives 6 cutting + 1 counter-knife
Feeding speed up to 21 [running meters/min]
Chipping capacity up to 20 [stère meters/h]
Width of chips up to 35 depends on material [mm]
Drum diameter 520 [mm]
Hopper dimensions (WxH) 550 x 370 [mm]
Length of chain feeder loading table 680 (flap 600)*** [mm]
Screen 30x30 or 50x50 [mm]
Method of feeding mechanically by crane
Type of drive tractor’s PTO
Min. power of tractor 120 [hp]
()* - unfolded, ready to work.
()** - weight depends on equipment installed.
()*** - available as an option.
Standard equipment:
- Axial chassis up to 25 km/h
- Manually folded flat without chain feeder
- Swivelled by360° ejection tube with deflector
- Modern LED road lighting
- PTO
- Own hydraulic system
- Electronic system of work control with hour meter
Optional equipment:
- Sprung axle (towing speed 40 km/h) or air-type suspension (up to 80 km/h) equipped with air brakes
- Hydraulically folding loading table (flap) equipped with a chain feeder
- Hydraulically foldable ejection tube with automatic control of swivel by 240° and deflector.
- Extension of ejection tube
- Hydraulic crane