Terex TL210

2013 Terex TL210 Wheel Loader for sale, 160 HP, 13 Hours, NEW TEREX TL210, HEAT AND A/C3RD CONTROL CIRCUT, AUTO BUCKET RETURN, YELLOW BEACON, REAR AXLE WEIGHT
Operating weight (ISO 6016) 27,558 lbs (12,500 kg)
Tipping load, straight at full reach 19,613 lbs (8,895 kg)
Tipping load, articulated at full reach 17,397 lbs (7,890 kg)
Operating load, fully articulated 8,699 lbs (3,945 kg)
Total length, bucket on ground 23' 3 (7,095 mm)
Total width 8' 2 (2,500 mm)
Turning radius at outside bucket edge 19' 7 (5,970 mm)
Wheelbase 10' 2 (3,100 mm)
Total height (top of cab) 10' 8 (3,260 mm)
Standard Equipment
Operating Data, Standard Equipment
Service brake: Hydraulically actuated two-circuit power brake system. Oil-immersed multi-disc
brakes in both axles, acting on all 4 wheels via 4-wheel drive.
Auxiliary brake: Hydrostatic drive provides dynamic braking.
Parking brake: Spring-loaded brake acting on multi-disc brakes on both axle shafts.
Brakes
Articulated, 2 steering cylinders with final positioning damping on both sides, fully hydraulic
through Load-Sensing priority valve, quick and easy steering even at engine idle-running speed.
Total steering angle 80°
Steering
Maximum pump capacity 42.3 gpm (160 Lpm)
Maximum working pressure 3,916 psi (270 bar)
Control unit: Proportional hydraulic valve with 3 control circuits. Simultaneous, independent
control of all movements. Single, four-way control lever (multi-function lever) for 1 tilt and
2 lift cylinders with integrated travel direction selector switch and switch for additional
control circuit. Float position in control circuit “Lowering”, electrohydraulically operated.
Additional control circuit electrically operated with preselection of flow rate and
Impulse/Continuous Operation.
Hydraulic System
Fuel tank 63 gal (240 L)
Hydraulic system (includes tank) 35.6 gal (135 L)
Fluid Capacities
Manufacturer, model Cummins, QSB 6.7
Type 6-cylinder, turbocharged diesel engine,
COM III/EPA III
Combustion 4-stroke, common rail injection
Displacement 409 in3 (6,700 cm3)
Net power rating at 2200 rpm (ISO 9249) 162 hp (119 kW)
Cooling system Water
Engine
Nominal voltage 24 V
Battery 2 x 12V / 105 Ah / 760 A
Electrical System
Hydrostatic drive, closed circuit, independent from loader
hydraulics. Automatic adjustment of drawbar pull and
speed. Hydrotransmatic drive system providing automatic
shifting for two speed ranges. Infinitely variable speed
control forward and reverse. 4-wheel drive from
reduction gear on rear axle via drive shaft to front axle.
Combination braking, inching pedal.
2 gears:
Speed range I 0 - 3.7 mph (0-6 km/h)
Speed range II 0 - 25 mph (0-40 km/h)
Drawbar pull 23,625 lbs (10,500 daN)
Power Transmission
Front: Rigid planetary final drive axle. Limited slip-type
differential.
Rear: Oscillating (with cushioning) planetary final drive axle,
with integrated reduction gear. Limited slip-type differential.
Oscillation ±12°