I-10 EQUIPMENT SALES is selling this:

Dragon

Back

Make: Dragon
Category: Trucks / Semi-Trailer Truck
Location: North America: United States of America
6642 Industrial RD, 77705, Beaumont, - USA
Condition: Used - very good condition
Price: Price on Request

Contact Seller

Description

Product Description
DESCRIPTION: 5000 GALLON DOUBLE CONICAL PUP TRAILER, INSULATED
TYPE: DOUBLE CONICAL, DOT 407 SPEC, PUP TRAILER
CAPACITY: 5000 GALLONS, PLUS 2%
COMPARTMENT: SINGLE
COMMODITY: UNSPECIFIED FLUIDS
DESIGN PRESSURE: 25 PSI INTERNAL, 45 PSIG HYDROSTATIC TEST
LENGTH: 286” HEAD SEAM TO HEAD SEAM, 455” OAL
SHELL: 5454 H32 ALUMINUM 66” I.D. END, 76” I.D. CENTER ONE
CIRCUMFERENTIAL SEAM AT CENTER
HEAD: 5454 TEMPER 0 ALUMINUM, ASME F&D
BAFFLE: 4 – REINFORCED ASME FLARED AND DISHED
WELDS: INTERNAL – AS WELDED, EXTERNAL – SMOKE AND
DISCOLORATION REMOVED
STIFFENER RINGS: 9-2” X 5” ALUMINUM CHANNEL, EXTERNAL
SOLID WELDED
MANWAY: KNAPPCO LM1151 20” MANHOLE WITH 6 CAM OVER LATCHES
CLEANOUTS: 4 – 3” MALE PIPE NIPPLE WITH STAINLESS STEEL CAP ON TOP CENTER LINE, 1 IN EACH BAFFLE SPACE.
OVER TURN PROTECTION: SPILL DAM AT TOP MANWAY WITH DRAIN HOSE, INCLUDES LEVEL GAGE PORT, RELIEF VALVE AND VAPOR RECOVERY VALVE
LIGHTS: FULL DOT LIGHTS, LED SEALED LIGHTS, HARNESS AND
JUNCTION BOX WITH TERMINAL STRIP
SUSPENSION: WATSON CHALIN INTEGRA TI300 (LIGHT WEIGHT INTEGRATED) AIR RIDE, 30,000 LB PER AXLE
AXLES: 25,000 LB ROUND W/OUTBOARD DRUMS, DURA-LIGHT
LIGHTWEIGHT HUBS AND CAST LITE DRUMS
WHEELS: 10 HOLE, ALUMINUM , HUB PILOT, 8.25 X 24.5
TIRES: 11R-24.5 RADIAL, DUAL
BRAKES: (2) 16 1/2 X 7 WITH SPRING PARKING, AUTO SLACKS, WABCO4S-2M ABS SYSTEM RUNNING 2 AXLES AT FRONT, HEAVY DUTY DOUBLE BALL TURNTABLE,
GEAR: FIXED LENGTH HINGED DRAWBAR, SWIVEL PINTLE EYE,
SAFETY CABLES, DROPFOOT DRAWBAR JACK, 1 AXLE AT
REAR
DOLLY: FIXED A FRAME TONGUE
BUMPER: HEAVY DUTY PER DOT REQUIREMENTS
FENDERS: 3/4 FENDERS ON FRONT, FULL ON REAR
MUD FLAPS: ANTI SAIL
HOSE TUBE: 2 – 8” X 21’ HOSE TUBE, ONE EACH SIDE
COATING: EXTERIOR, ALL STEEL SURFACES WHITE METAL STEEL GRIT BLAST, 2 MIL PROFILE (SP-6), PAINTED SILVER METALLIC WITH HIGH SOLIDS POLYURETHANE, 4-6 MIL DRY FILM THICKNESS
LINING: CHEMICAL RESISTANT EPOXY LINER
PLACARDS: 4 – SLIDE-IN PLACARDS, SIDES AND REAR PIN ON
BOTTOM VALVE: 6” X 4” HIGH FLOW SHORT RADIUS 90 DEG AIR OPERATED EMERGENCY VALVE WITH SHEAR
SECTION AT BOTTOM CENTER FACING REAR DISCHARGE FROM VALVES RUNNING FORWARD IN TO CROSS WITH SIDE PIPE: LOADS CONTAINING SURE SEAL VALVES WITH CAMLOCK
AND CAP. THRU CROSS TO SURE SEAL VALVES WITH 45
DEGREE TOWARDS PASSENGER SIDE FENDER WITH HOSE
BARB TO FIXED PIPE ALONG PASSENGER FRONT FENDER
TURNING 45 DEGREES TO CENTER OF HEAD WITH HOSE BARB.
ALL PIPE IS 4” SCH40 ALUMINUM AND ALL FITTINGS/VALVES
ARE 4”.
VAPOR RECOVERY: 3” AIR OPERATED BETTS BUTTERFLY VALVE AT TANK TOP TEEING TO ROAD AND CURB SIDE. OUT ROAD SIDE WITH CONTOUR PIPE DOWN TANK SIDE WITH VALVE AND CAMLOCK WITH CAP JUST REAR OF LADDER AND EXTENDING TO REAR OF TANK WITH BETTS VALVE, CAMLOCK AND CAP. OUT CURB SIDE DOWN TOP OF TANK DOWNWARD TO 135 DEGREE TURN UP WITH BETTS VALVE, CAMLOCK AND CAP.
RELIEF’S: DOT SPECIFICATION, FORT VALE STAINLESS STEEL
PRESSURE/VACUUM RELIEF VALVE, LOCATED IN SPILL DAM
WITH AIR KIT AND GAUGE
LEVEL GAUGE: 1 – “TITAN LOGIX TD80 DUAL PROBE ELECTRONIC LEVEL READER. DISPLAY MOUNTED CURB SIDE FRONT FENDER IN STAINLESS STEEL ENCLOSURE.
CALIBRATION: CALIBRATED IN BARRELS
THERMOMETER: 1- CONTACT THERMOMETER, 1 EACH COMPARTMENT, ON CURB SIDE
GAUGE: 60 PSI GAUGE INSTALLED IN VAPOR RECOVERY LINE
LADDER: BOLT ON LADDER TO SPILL BOX WITH TOP PLATFORM STEP INSTALLED ON PASSENGER SIDE
INSULATION: 5” R19 AROUND ALL OF BBL WITH 3” ROXEL SPACER ON ALL RINGS
JACKETING: .04 ALUMINUM ON SHELL, .063 ALUMINUM ON END CAPS
ADDITIONAL FEATURES: SIDE MOUNTED FLOAT INDICATOR AND THERMOMETER
PROTECTED BY SURROUNDING 1/2” X 2” GUARD RING
EXTRA 2” COUPLING IN SPILL BOX (TYP USE FOR SCULLEY)
Suspension : Air Ride
Composition : Aluminum
Length : 38
Tires : 11R24.5
Trailer Status : Available
Trailer ID : 936ED462-FBC9-E511-B082-5CF3FC7AA6E2