- Make
- Dragon
- Category
- Vehicles / trucks: Trucks: Semi Trailer
- Year
- 2016
- Location
-
North America: United States of America
6642 Industrial RD, 77705, Beaumont, - USA - Condition
- Used
- Price
- Price on Request
I-10 EQUIPMENT SALES
is selling this:
Dragon
Description
- Description: 12,600 gal. LPG/NH3 Transport Trailer
- Specifications: ASME Section VIII, Division 1 NFPA58, 49 CFR 178.337 (specification mc-331)
- Capacity: 12,835 water gallons
- Commodity: Liquefied Petroleum Gas / Ammonia
- Design Pressure: MAWP: 265 psi
- Design Temp: -20°F/125°F
- Length: 437” head seam to head seam, 44’ OAL
- Shell: SA517, 80” ID
- Head: SA517, ASME Hemispherical
- Baffles: 2 – Aluminum bolt-on
- Welds: RT-1 (100% radiography) Wet magnetic particle tested per USDOT requirements, Post weld heat treated per ASME/USDOT requirements
- Manway: 16” manway with O-Ring seal, rear head
- Suspension: Watson & Chalin Integra 30K air ride suspension, 50” axle spacing, 19” ride height.
- Axles: 25,000 lbs round w/ outboard drums, dura-light lightweight hubs and cast lite drums
- Wheels: 10 hole, steel, 8.25 x 24.5 hub pilot wheels
- Tires: 11R24.5 radial, single chip and cut resistant
- Brakes: 16 ½” x 7” Pads, auto slacks, 4S/2M Merritor-Wabco ABS system
- Upper Coupler: 5/16” bolster plate, bolt on adjustable
- Landing Legs: 2 speed, heavy duty, high capacity lift
- Rear Bumper: Heavy duty per dot requirements with under-ride protection
- Fenders: 3/4 fenders on front, full fenders on rear. Bolt on front fender mount arms and rear fender supports
- Mud Flaps: MTC anti-sail
- Hose Tube: 2 - 8" x 20' aluminum hose tubes, one each side complete with 16” long external reinforcement sleeves and cast doors at each end of each hose tube.
- Coating: Sand blast to white metal, epoxy prime (2-3 mil), top coat-white (2-3 mil), clear coat (1.5-2 mil). 5.5-8 mil dry film thickness.
- Placards: Decals and placards installed in accordance with all USDOT regulations.
- Extinguisher: 1 - 20# fire extinguisher with bracket
- Chock Block: 2 – Chock blocks with holder mounted on rear
- Electrical: 12 Volt Non-incendive trailer light kit supplied and in full compliance with DOT regulations.
- Trailer Electrical and Air Connections – Standard 7 Way nose box mounted road side front
- NOZZLES/PIPING/VALVES:
- Relief Valves: 2 – 3” internal safety relief valves. Located at center of trailer (TDC) with rollover protection.
- Liquid Withdraw: 3" internal valve - Operated by a mechanical lever assembly on curb side of unit 2" globe valve with ACME adapter (both curb-side and road-side)
- Vapor/ Top fill: 3" internal valve - Operated by a mechanical lever assembly on curb side of unit 2" globe valve with ACME adapter (both curb-side and road-side)
- Pump feed: 4" internal valve - manually opened via control handle on valve
- Pump discharge: 2" globe valve with ACME adapter (both curb-side and road-side).
- LPG Pump: Blackmer pump (hydraulically driven)
- Bleed/ Blowdown: 1/2” bleed valve provided at each manual valve and piped to safe area (top of trailer) via stainless steel tubing
- Level gauge: Float gauge, 4” dial.
- Pressure gauge: 2-1/2’ dial, 0-300 psi
- Thermometer: -40˚F/160˚F
- Fixed LL Gauges: 83%, 85%, 86.5%, and 90%
- Emergency System: Emergency shutdown valves will be located front street side & rear curb side
- Suspension : Air Ride
- RearAxles : Tri
- Composition : Steel
- Tires : 11R24.5
- Gallons : 12600
- ForSaleListPrice : 149500