- Make
- Fabtec
- Model
- AGG PREP RIP-RAP & SCREENING PLANT
- Category
- Construction / Waste, Recycling & Quarry Equipment
- Location
-
North America: United States of America
P.O. Box 31279, 85001, Phoenix, - USA - Condition
- Used
- Price
- Price on Request
Description
- PRO 42"x17' VIBRATING GRIZZLY FEEDER:
- 25 HP TEFC variable speed electric motor drive.
- T1 adjustable grizzly bars.
- 1/2" side walls with 1/2" AR bolt-in liners.
- 8" WF cross members on 18" centers.
- Alco high temper isolation springs.
- 90 MM Torrington YM spherical bearings.
- Solid steel machined bearing housings.
- 4150 stress proof shafts.
- 4140 2"x12" drive gears.
- Flow through lubrication, ensuring smooth running and heat dissipation.
- All bolts are oversized grade #8 with L9 washers and self locking nuts.
- AR LINED GRIZZLY UNDERSIZE CHUTE.
- 8'x19' 3/4" THICKNESS STEEL PLATE FEED HOPPER WITH 12" WF SUPPORT FRAME FOR HOPPER.
- HEAVY DUTY HYDRAULIC DUMP GRIZZLY:
- Heavy duty support frame assembly .
- 1 1/2" diameter round stock and 1"x7" flat bar formed grizzly bars.
- 10 HP electric over hydraulic power package.
- Brackets to hold grizzly at two different operating positions.
- 36"x42' SCREEN FEED CONVEYOR:
- 15 HP TEFC Motor.
- Vulcanized lagged head pulley and winged type self cleaning tail pulley.
- 3 ply 1/4" belting.
- Impact idlers in feed area.
- Full length formed skirt board.
- PRO 5X14 2 DECK INCLINE SCREEN:
- 20 HP TEFC with pivot motor base and power and belt.
- 3/8" PL side walls, with 3"x2" angle iron reinforcement on edges.
- Hutch bolted screen decks, constructed of 5"x3"x3/8" angle iron and 4"x2" rectangular tubing, 1/2"x3" FB crown bars.
- AR lined discharge lips.
- AR lined feed box.
- Alco high temper isolation springs.
- 100 MM Torrington spherical bearings specially designed for shaker screens.
- Center support tube 9" with 1/2" wall and 2" thick flanges.
- FAB TEC designed cartilage style bearing housings, heavy duty with 1 1/4" wall thickness.
- Eccentrics with add on weights.
- 10" WF sub frame 33# with 8" CL 13.75# cross members.
- Standard side tension formed clamp bars and 1/2" crown bar rubbers.
- 1/4" PLATE UNDER SCREEN HOPPER WITH WEAR STRIPS AND ADJUSTABLE 1/2"x6" WIPERS.
- 18" WALKWAYS BOTH SIDES OF SCREEN & BACK 48" PLATFORM,
- SKYWALK FLOOR AND 3" TOE BOARDS, 42" SOLID HANDRAILS WITH ACCESS LADDER.
- 48"x18' UNDER SCREEN CONVEYOR:
- 7.5 HP TEFC Motor.
- Vulcanized lagged head pulley and winged type self cleaning tail pulley.
- 2 ply 3/16"x1/16" belting.
- 150 KW PERKINS GENERATOR SET
- Safety shut down system.
- Heavy duty motor mount.
- Maintenance walkway with handrails and ladders.
- Radiator protection.
- Top weather hood cover.
- Heavy duty air cleaners.
- 125 gallon diesel fuel tank.
- MOTOR CONTROL CENTER
- 400 amp main breaker.
- NEMA 4 enclosure.
- Start/Stop buttons on door.
- 110 volt step down transformer with two receptacles.
- 30 HP Yaskawa variable frequency controller for the VGF.
- Starters: All on-plant required starters plus (3) off-plant 15 HP conveyors, and (1) 20 HP radial stacker with 5 HP power raise and 2 HP reversing radial drive.
- RADIO REMOTE CONTROL
- Start/Stop for the VGF.
- Variable speed control for the VGF.
- Raise/Lower of the hydraulic dump grizzly.
- Emergency plant shutdown.
- TANDEM AXLE CARRIER 18" WF BEAMS 50#
- Hutch 9700 series equalizing suspension; 61" centers and 10' wide axle.
- 22,500# Standard forge axles.
- 11:00x22.5 Tires, ten hole Budd Wheels.
- Standard 5th wheel plate, lights, & mud flaps.
- six ground support stands with jacking legs.
- HYDRAULIC STABILIZING SYSTEM
- (2) 70,000# capacity front mounted hydraulic lift cylinders with foot pads.
- 12 volt hydraulic power package.
- SAFETY GUARDS PROVIDED.
- RUST INHIBITOR PRIMER AND TWO FINISH COATS OF PAINT.
- TRAVEL AND OPERATING HEIGHT 14' 7", WIDTH 10'6".
- AXLE WEIGHT - 44,500#.
- PIN WEIGHT - 24,000#.
- TOTAL WEIGHT- 48,500#.