Nordmeyer DSB 3/14

1. Nordmeyer, typ DSB 3/14, s/n: 2016, year 2007

Drilling rig Nordmeyer typ DSB 3/14 on Mecedes-Benz Actros 2644- axel configuration 6x4x4x(2)
Blutec 5 – euro emission: euro 5
Drilling depth capa city: 600 meters- with 12” final diameter
Installed power: 265KW
Drilling rig can use more then 10 method of drilling
Patented construction of the Mast
Maximum force of the Mast-hook – 30.000 daN
Feed length – 7,70 m
Length of mast – 10,00 m
Feed force/ pull back force – 15.000 daN
Pull down force – 7.500 daN
Crown of mast-winch (pull back force 2.000 daN), 150 meters of rope
Double rotary head- at the same time drilling rods with bits and casing pipes
I gear: -torque 2440 daNm, speed 0-37 rpm
II gear: - torque 1530 daNm, speed 0-58 rpm
II gear: - torque 620 daNm, speed 0-135 rpm
Quick manual and automatic mechanism for unscrew and grab rods/pipes
Additional cylinder for wrenching / pull up pipes from bore hole
Drill head movable in 4 positions
3x mud pumps
- Centrifugal AMTEC pump, nominal working pressure: 10 bar, flow: 2500 l/min
- Screw pump WAGEN, nominal working pressure 16bar, flow 600l/min
- Three piston pump CAT, nominal working pressure 25bar, flow 30l/min
All pump are powered and control by hydraulic system- perfect solution for all geology.
Year of construction: 2007
Milage: 26000 km
Working hours: 9866 mth
VIN: 2016

- Straight Flush Rotary Drilling
A) direct flush rotary drilling up to
dia. 17½” = dia. 445 mm
B) reverse circulation drilling with sludge
pump or air-lift drilling
with compressor up to drilling dia. 1120 mm
in front of the mast, resp. up to dia. 1220 mm
below the mast.
- Down-The-Hole-Hammer Drilling with stand-by compressor up to drilling dia. 17½” = dia. 445 mm
Condition:
Machine is in immaculate condition, always serviced in Nordmeyer service.
Machine never working in Poland.
Always serviced by Nordmeyer GmbH and Mercedes-Benz service station in Swizerland.

2. Casing pipes
Orginal Nordmeyer casing tubes, outside/inside diameter: 158/142mm, 2m length, quantity: 60 meters are including in price

3. Rods
Orginal Nordmeyer 95NS, 95mm, suitable for centrifugal pumps and DTH hammer, friction welded 95mm, 2m length, quantity: 120 meters are including in price